Struct pallet_atomic_swap::pallet::Pallet

impl<T: Config> Pallet<T>

pub fn create_swap( origin: OriginFor<T>, target: T::AccountId, hashed_proof: HashedProof, action: T::SwapAction, duration: BlockNumberFor<T> ) -> DispatchResult

Register a new atomic swap, declaring an intention to send funds from origin to target on the current blockchain. The target can claim the fund using the revealed proof. If the fund is not claimed after duration blocks, then the sender can cancel the swap.

The dispatch origin for this call must be Signed.

target: Receiver of the atomic swap.
hashed_proof: The blake2_256 hash of the secret proof.
balance: Funds to be sent from origin.
duration: Locked duration of the atomic swap. For safety reasons, it is recommended that the revealer uses a shorter duration than the counterparty, to prevent the situation where the revealer reveals the proof too late around the end block.

pub fn claim_swap( origin: OriginFor<T>, proof: Vec<u8>, action: T::SwapAction ) -> DispatchResult

Claim an atomic swap.

The dispatch origin for this call must be Signed.

proof: Revealed proof of the claim.
action: Action defined in the swap, it must match the entry in blockchain. Otherwise the operation fails. This is used for weight calculation.

pub fn cancel_swap( origin: OriginFor<T>, target: T::AccountId, hashed_proof: HashedProof ) -> DispatchResult

Cancel an atomic swap. Only possible after the originally set duration has passed.

The dispatch origin for this call must be Signed.

target: Target of the original atomic swap.
hashed_proof: Hashed proof of the original atomic swap.

impl<T: Config> Pallet<T>

pub(crate) fn deposit_event(event: Event<T>)

Trait Implementations§

impl<T: Config> BeforeAllRuntimeMigrations for Pallet<T>

fn before_all_runtime_migrations() -> Weight

Something that should happen before runtime migrations are executed.

fn clone(&self) -> Self

Returns a copy of the value. Read more

1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl<T> Debug for Pallet<T>

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl<T: Config> GetStorageVersion for Pallet<T>

type InCodeStorageVersion = NoStorageVersionSet

This type is generated by the pallet macro. Read more

fn in_code_storage_version() -> Self::InCodeStorageVersion

Returns the in-code storage version as specified in the storage_version attribute, or [NoStorageVersionSet] if the attribute is missing.

fn on_chain_storage_version() -> StorageVersion

Returns the storage version of the pallet as last set in the actual on-chain storage.

fn current_storage_version() -> Self::InCodeStorageVersion

👎Deprecated: This method has been renamed to in_code_storage_version and will be removed after March 2024.

DEPRECATED: Use [Self::current_storage_version] instead. Read more

fn on_initialize(_n: BlockNumber) -> Weight

Block initialization hook. This is called at the very beginning of block execution. Read more

fn on_finalize(_n: BlockNumber)

Block finalization hook. This is called at the very end of block execution. Read more

fn on_idle(_n: BlockNumber, _remaining_weight: Weight) -> Weight

Hook to consume a block’s idle time. This will run when the block is being finalized (before [Hooks::on_finalize]). Read more

fn on_poll(_n: BlockNumber, _weight: &mut WeightMeter)

A hook to run logic after inherent application. Read more

fn on_runtime_upgrade() -> Weight

Hook executed when a code change (aka. a “runtime upgrade”) is detected by the FRAME Executive pallet. Read more

fn offchain_worker(_n: BlockNumber)

Implementing this function on a pallet allows you to perform long-running tasks that are dispatched as separate threads, and entirely independent of the main blockchain execution. Read more

fn integrity_test()

Check the integrity of this pallet’s configuration. Read more

impl<T: Config> IntegrityTest for Pallet<T>

fn integrity_test()

See [Hooks::integrity_test].

fn offchain_worker(n: BlockNumberFor<T>)

This function is being called after every block import (when fully synced). Read more

fn on_finalize(n: BlockNumberFor<T>)

See [Hooks::on_finalize].

impl<T: Config> OnGenesis for Pallet<T>

fn on_genesis()

Something that should happen at genesis.

fn on_idle(n: BlockNumberFor<T>, remaining_weight: Weight) -> Weight

See [Hooks::on_idle].

fn on_initialize(n: BlockNumberFor<T>) -> Weight

See [Hooks::on_initialize].

fn on_poll(n: BlockNumberFor<T>, weight: &mut WeightMeter)

Code to execute every now and then at the beginning of the block after inherent application. Read more

impl<T: Config> OnRuntimeUpgrade for Pallet<T>

fn on_runtime_upgrade() -> Weight

See [Hooks::on_runtime_upgrade].

impl<T: Config> PalletInfoAccess for Pallet<T>

fn index() -> usize

Index of the pallet as configured in the runtime.

fn name() -> &'static str

Name of the pallet as configured in the runtime.

fn name_hash() -> [u8; 16]

Two128 hash of name.

fn module_name() -> &'static str

Name of the Rust module containing the pallet.

fn crate_version() -> CrateVersion

Version of the crate containing the pallet.

impl<T: Config> PalletsInfoAccess for Pallet<T>

fn count() -> usize

The number of pallets’ information that this type represents. Read more

fn infos() -> Vec<PalletInfoData>

All of the pallets’ information that this type represents.

impl<T> PartialEq for Pallet<T>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T: Config> StorageInfoTrait for Pallet<T>

fn storage_info() -> Vec<StorageInfo>

impl<T: Config> WhitelistedStorageKeys for Pallet<T>

fn whitelisted_storage_keys() -> Vec<TrackedStorageKey>

Returns a Vec<TrackedStorageKey> indicating the storage keys that should be whitelisted during benchmarking. This means that those keys will be excluded from the benchmarking performance calculation.

impl<T> Eq for Pallet<T>

Auto Trait Implementations§

impl<T> RefUnwindSafe for Pallet<T>
where T: RefUnwindSafe,

impl<T> Send for Pallet<T>
where T: Send,

impl<T> Sync for Pallet<T>
where T: Sync,

impl<T> Unpin for Pallet<T>
where T: Unpin,

impl<T> UnwindSafe for Pallet<T>
where T: UnwindSafe,

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> CheckedConversion for T

fn checked_from<T>(t: T) -> Option<Self>
where Self: TryFrom<T>,

Convert from a value of T into an equivalent instance of Option<Self>. Read more

fn checked_into<T>(self) -> Option<T>
where Self: TryInto<T>,

Consume self to return Some equivalent value of Option<T>. Read more

impl<T> Conv for T

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more

impl<T> DynClone for T
where T: Clone,

fn __clone_box(&self, _: Private) -> *mut ()

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more

impl<T> FmtForward for T

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T, U> IntoKey for T
where U: FromKey<T>,

fn into_key(self) -> U

impl<T> IsType<T> for T

fn from_ref(t: &T) -> &T

Cast reference.

fn into_ref(&self) -> &T

Cast reference.

fn from_mut(t: &mut T) -> &mut T

Cast mutable reference.

fn into_mut(&mut self) -> &mut T

Cast mutable reference.

impl<T, Outer> IsWrappedBy<Outer> for T
where Outer: AsRef<T> + AsMut<T> + From<T>, T: From<Outer>,

fn from_ref(outer: &Outer) -> &T

Get a reference to the inner from the outer.

fn from_mut(outer: &mut Outer) -> &mut T

Get a mutable reference to the inner from the outer.

impl<T> Pipe for T
where T: ?Sized,

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R ) -> R
where Self: BorrowMut, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.

impl<T> Pointable for T

const ALIGN: usize = _

The alignment of pointer.

type Init = T

The type for initializers.

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more

impl<T> Same for T

type Output = T

Should always be Self

impl<T> SaturatedConversion for T

fn saturated_from<T>(t: T) -> Self
where Self: UniqueSaturatedFrom<T>,

Convert from a value of T into an equivalent instance of Self. Read more

fn saturated_into<T>(self) -> T
where Self: UniqueSaturatedInto<T>,

Consume self to return an equivalent value of T. Read more

impl<T> Tap for T

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more

fn tap_borrow(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow, B: ?Sized,

Immutable access to the Borrow of a value. Read more

fn tap_borrow_mut(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut, B: ?Sized,

Mutable access to the BorrowMut of a value. Read more

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.

fn tap_borrow_dbg(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.

fn tap_borrow_mut_dbg(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.

impl<T> ToOwned for T
where T: Clone,

type Owned = T

The resulting type after obtaining ownership.

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T> TryConv for T

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more

impl<T, U> TryFrom for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<T, U> TryInto for T
where U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

impl<T, U> TryIntoKey for T
where U: TryFromKey<T>,

type Error = >::Error

fn try_into_key(self) -> Result<U, >::Error>

impl<S, T> UncheckedInto<T> for S
where T: UncheckedFrom<S>,

fn unchecked_into(self) -> T

The counterpart to unchecked_from.

impl<T, S> UniqueSaturatedInto<T> for S
where T: Bounded, S: TryInto<T>,

fn unique_saturated_into(self) -> T

Consume self to return an equivalent value of T.

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

fn vzip(self) -> V

impl<T> WithSubscriber for T

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more

impl<T> JsonSchemaMaybe for T

impl<T> MaybeDebug for T
where T: Debug,

impl<T> MaybeRefUnwindSafe for T
where T: RefUnwindSafe,